Driver Software

Multiple Tool Setup in the Torchmate Driver Software Version 3

Torchmate CNC systems feature multiple tools that can be used with the system.  If more than one tool is installed on a CNC table the software must be configured to alllow each tool to operate.

>> Read Full Article

Initial Configuration for Torchmate Driver Software Version 3

The Torchmate driver software version 3 is designed to work with numerous table configurations.  As such there are a few necessary steps to ensure that the software is configured properly.  These steps cover testing the motor signals and setting what type of motors are used.

>> Read Full Article

Torchmate Driver Software Version 3 Operation Guide

Cut quality is predominantly determined by three settings, speed, height, and amperage.  Finding the best settings for all three as well as a few other settings will allow for the best quality cuts that plasma can produce.

>> Read Full Article

Using Express Mode in Version 3 of the Torchmate Driver software

Express Mode is used to smooth out table motions when traveling at slow speeds under 20-30 in/min.

>> Read Full Article

Continuous Contouring in Version 2 of the Driver Software

Adjusting your contiuous contouring can help with sharp direction changes.

>> Read Full Article

Basic Operation in Version 2 of the Torchmate Driver Software

This guide outlines the basic operation in Version 2 of the Torchmate driver software.

>> Read Full Article

Understanding Torchmate Driver Version 2

This file contains a brief synopsis of the features and tools available in the Torchmate driver software. Below is the main screen page you will see upon opening the program, either in Online or Offline mode. Toward the top you the screen you will find the Menus available; File, Configuration, Controller, View, Coordinates, and Help.

>> Read Full Article

Importing to the Torchmate Driver Software Version 2

This guide expalins how to import a file into version 2 of the Torchmate driver software.

>> Read Full Article

Program Zero in Version 2 of the Torchmate Driver Software

Program zero is the position the torch will need to be at before starting a program.

>> Read Full Article

Torchmate Driver Software Version 2 Configuration

Software configurations for Torchmate driver software version 2.

>> Read Full Article

Feedrate & Ramping in Version 2 of the Torchmate Driver Software

Feedrate and Ramping trouble shooting for Version 2 of the Torchmate driver software.

>> Read Full Article

Jump to Line in Version 2 of the Torchmate Driver Software

Using the jump to line feature in the Torchmate driver software version 2.

>> Read Full Article

Motor Signals in Version 2 of the Torchmate Driver Software

Setting motor signals in the Torchmate driver software Version 2.

>> Read Full Article

Gantry Testing in Version 2 of the Torchmate Driver Software

If you are finding that your machine is not making true direction movements, or that the machine is changing the outcome of your design even though the program is telling you that the movements are correct, it could be the result of your X or Y axis being out of alignment.  This guide explains the steps for version 2 of the Torchmate driver software.

>> Read Full Article

Oxy-Fuel Setup in Version 1 of the Torchmate Driver Software

This guide expalins how to mount and control an oxy fuel torch in version 1 of the Torchmate driver software.

>> Read Full Article

Poor Circular Cutting in Version 2 of the Torchmate Driver Software

There are three basic reasons for poor circular cutting, the design of the image, the mechanical operation of the gantry, and the plasma cutter’s configurations. We will discuss all three of these topics and how they are adjusted in version 2 of the Torchmate driver software.

>> Read Full Article

Torchmate Driver Software Version 2.09 Plasma Configuration

These are my configuration setup pages for the Torchmate driver software version 2.09.

>> Read Full Article

Torchmate Driver Software Version 2.09 Routing Configurations

These pages are supplemental to the Torchmate 2.09 Plasma Configurations, and discuss changes made to only certain pages of the Configuration menu to allow the Routing tools to be utilized.

>> Read Full Article

Torchmate Driver Software Version 2.14 Plasma Configuration

Use this as a page by page configuration set-up guide for your Version 2.14 software.

>> Read Full Article