WELCOME TO THE TORCHMATE DRIVER SOFTWARE DOWNLOAD PAGE
Welcome to the Torchmate Driver Software Support Page. This page contains all the different revisions of the Torchmate Driver Software. Please locate your version of the Torchmate Driver software below for your software installers and users manual. If you are not sure which version you require please contact Torchmate Customer Service & Support at (775) 673-2200 x4.
Identifying Your Software Version
Click here to see pictures of each software so you can identify which version you have!
Torchmate | Visual Machine Designer
Visual Machine Designer is a software program that interfaces with the Accumove 2 and Accumove 3 motion control system. Torchmate Visual Machine Designer provides a basic shape library allowing the operation of the table without the need for CAD software. The Accumove motion controller easily arrays jobs promoting multiple cuts without development of a new job. Lincoln Electric Cutting Systems provides this download to Accumove customers. To find out if your equipment is compatible with Visual Machine Designer please contact Torchmate Tech Support 775-673-2200 ext 4.
Download Visual Machine Designer Software Here TM-VMD Setup
Torchmate Driver Software Version 4
For USB Model 501A Signal Generators. This software will control the motions of the table via standard g-code and will convert most *.dxf files into g-code commands. This is a necessary part of the Torchmate machines. If you are not reinstalling version 4 please contact Torchmate Technical Support before downloading to ensure upgradeability. If you are currently using Version 2 or 3 please contact the manufacturer at 888-883-5274 as this may be a purchased upgrade.
If you do not purchase the upgrade and attempt to use this software, you may damage your signal generator's firmware by attempting to revert to the old versions after installing version 4.
Download Torchmate 4.5 Here - *WARNING* Please read the above STOP Sign message before downloading Download this version of the Torchmate 4 drivers software if your machine’s purchase date was On or After May 2012.
Download Torchmate 4.0 Here - *WARNING* Please read the above STOP Sign message before downloading Download this version of the Torchmate 4 drivers software if your machine’s purchase date was On or Before April 2012.
If you are unsure of your purchase date, download Torchmate 4.5 first, and if it requires an updated license code you would instead need to download Torchmate 4.0. This does not harm your signal generator in any way, you can simply uninstall Torchmate 4.5 and then install Torchmate 4.0.
If you believe your purchase date was On or After May 2012, and reach the screen asking for the license code, please contact Torchmate Technical Support.
Torchmate 4 Driver Setup and Start Guide
Torchmate Driver Software Version 3
For USB Model 501A Signal Generators. This software will control the motions of the table via standard g-code and will convert most *.dxf files into g-code commands. This is a necessary part of the Torchmate machines. If you are not reinstalling version 3 please contact Torchmate Technical Support before downloading to ensure upgradeability. If you are currently using Version 1 or 2 of the software this may be a purchased upgrade.
Download Here
Download Users Manual Here
Torchmate 3 Driver Setup and Start Guide
Download Growth Series Setup Files
64 Bit 501a Signal Generator Drivers
These drivers are for Torchmate version 3 users who are installing the Version 3 Driver software on a Windows Vista/7/8 64 bit operating system.
Torchmate Driver Software Version 2
For Serial Port RS232 Connection Model 401A Signal Generators. This software will control the motions of the table via standard g-code and will convert most *.dxf files into g-code commands. This is a necessary part of the Torchmate machines. If you are not reinstalling version 2 please contact Torchmate Technical Support before downloading to ensure upgradeability.
Download Software Here
Download Users Manual Here